Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Renault Scenic?

Model: Renault Scenic Scenic IV, Scenic 4, MK IV, MK 4 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Service warning light

See other generations:
Video tutorial

To reset the Service light on a Renault Scenic, turn the key to switch on the instrument panel and then press and hold the button on the right side of the steering wheel as shown in the video. Keep the button pressed until the maintenance interval appears on the display: at this point, press the OK button for about 5 seconds until a message appears.

Then, press and hold the button again for another 10 seconds or so, until the light is reset, and then switch off the ignition.


Updated on 19 October 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Renault Scenic?
How to Reset the "Service" Light on a Renault Scenic?
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) Before you can start, ensure that the service has been performed, then sit in the driver's seat of your Renault Scenic. Begin by activating the instr…
How to reset the Service light on a Renault Scenic?
How to reset the Service light on a Renault Scenic?
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) To reset the Service light on a Renault Scenic, press the ignition button without pressing any pedals, so that only the instrument cluster lights up …
How to Reset the Service Light on a Renault Scenic - Grand Scenic
How to Reset the Service Light on a Renault Scenic - Grand Scenic
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) In this short and simple guide, we will see the procedure to reset the service light on a Renault Scenic and Grand Scenic. First, get inside the vehi…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos