Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Bonnet of the Renault Megane if the Cable Breaks

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Body

See other generations:
Video tutorial

This video shows how to open the bonnet of the Renault Megane III if the release cable for the lock breaks for any reason, the most likely being an intervention on the battery. Unfortunately, opening the bonnet from the outside is impossible; this operation must be done from the inside by using a crowbar to access the lock and open it, as shown in the video.

This task requires time and patience, and technology can assist us by using our smartphone to see where our eyes cannot reach.


Updated on 23 October 2026 by ScegliAuto


Related tutorials

How to Open the Bonnet of a Renault Megane if the Lever is Broken?
How to Open the Bonnet of a Renault Megane if the Lever is Broken?
Renault Megane (2002-2010 / Megane 2) If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: rem…
How to Change the Handbrake on a Renault Megane Scenic
How to Change the Handbrake on a Renault Megane Scenic
Renault Megane (2002-2010 / Megane 2) To replace the handbrake lever on a Renault Megane, first remove the glove compartment and the cover of the centre tunnel in the cabin. Lift the vehi…
How to Open the Bonnet of a Renault Megane
How to Open the Bonnet of a Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) Today's guide will show you how to open the bonnet of a Renault Megane, following these simple and quick steps. First, open the driver's side front d…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos