Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Renault Master

Model: Renault Master MK 2 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Timing belt

See other generations:
Video tutorial

Today, you will learn how to replace the timing belt on a Renault Master mk2 vehicle. Start by removing the front right wheel using a 24 mm socket spanner.

Next, lift the vehicle to completely remove the tyre and gain access to the timing belt. Loosen the pulley and slide off the belt.

Clean the gears with a wire brush and fit the new timing belt. Tighten the pulley and refit the wheel, which you will fully tighten once the vehicle is back on the ground.

Start the van to test its operation.


Updated on 24 October 2026 by ScegliAuto


Related tutorials

How to Replace the Timing Belt on the Renault Master
How to Replace the Timing Belt on the Renault Master
Renault Master (1997-2010 / MK 2) Today, you will learn how to replace the timing belt on the Renault Master 2 independently. To replace the belt, open the front bonnet and locate the…
Replacement of the heating control unit on Renault Master III
Replacement of the heating control unit on Renault Master III
Renault Master (2010-2023 / MK 3) In this video we see how to replace the air conditioning control unit on a Renault Master III van: the youtuber had removed the control unit to chang…
How to Replace the Front Headlamp Bulb on a Renault Master?
How to Replace the Front Headlamp Bulb on a Renault Master?
Renault Master (2010-2023 / MK 3) To replace the front headlamp bulb on a Renault Master, open the bonnet to access the screws securing the headlamp. These screws are located at the t…

    Frequently Asked Questions

    • Master 1997-2010 - When should the timing belt of a Renault Master be replaced? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos