Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Scenic
    4. : How to remove the left door panel of a Renault Scenic 3

Renault Scenic - Video tutorial

Model: Renault Scenic MK III, MK 3, Scenic III, Scenic 3 - Years 2009-2015
Part: Door panel
Operation: How to remove the left door panel of a Renault Scenic 3

Are you wondering how to remove the left door panel (driver's side) of a Renault Scenic 3? Let's see in this video how to proceed with the disassembly. Before starting work, let's disconnect the battery terminals in the engine compartment for safety. With a screwdriver or cordless screwdriver we go to unscrew the locking pins on the door panel, then, with a plastic lever, remove the push-button panel placed in the upper handle. We detach the power window control panel and disconnect the power cables. With the lever we detach the clamping clips of the panel placed in the door body. Finally, we grab the panel with our hands and remove it from the cockpit.


Posted on 8 October 2023 by ScegliAuto



Removing the Renault Scenic lock 3
Renault Scenic (2003-2009 / MK 2, Scenic 2) Do we want to remove the cylinder or the door lock of a Scenic? Let's see the disassembly of the lock from inside the door. We open the car door, uns
How to dismantle the door panel in the Renault Scenic?
Renault Scenic (2016-2022 / Scenic IV, MK 4, MK IV, Scenic 4) In this tutorial we can see how to disassemble the door panel in the Renault Scenic, an extremely simple and quick operation. First of all, we open t
How to open the fuel door that is locked in the Renault Scenic?
Renault Scenic (2009-2015 / MK III, MK 3, Scenic III, Scenic 3) In the Renault Scenic, it can happen that the fuel door gets stuck, for example due to a problem with the lock button or the actuator. In these cases

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos