Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you open the hood of the Renault Scenic when the cable is broken?

Model: Renault Scenic MK IV, Scenic 4, MK 4, Scenic IV - Years 2016-2022
Part: Body

The opening of the hood of any car, including the Renault Scenic, is well known to be done through the lever inside the cabin, as the video shows us, near the pedals, which is connected through a metal cable to the latch on the hood, near the front grille. It should be noted that the cable or handle may break due to wear and tear, so in these cases the use of pliers, preferably with narrow beaks, can be helpful in grabbing the end of the cable and pulling it to open it.

Posted on 6 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Bonnet of a Renault Scenic
How to Open the Bonnet of a Renault Scenic
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) This short and simple guide will show you how to open the bonnet of the Renault Scenic, following the instructions below. First, open the driver's si…
How to Replace the Handbrake Button on a Renault Scenic
How to Replace the Handbrake Button on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) To replace the handbrake button on a Renault Scenic, pry off the panel around the button, located to the left of the steering column. Once the panel …
How to Open a Stuck Fuel Flap on a Renault Scenic?
How to Open a Stuck Fuel Flap on a Renault Scenic?
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) On the Renault Scenic, it may happen that the fuel flap gets stuck, for example, due to an issue with the locking button or the lock actuator. In the…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos