Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Bonnet of a Renault Scenic

Model: Renault Scenic MK III, Scenic III, Scenic 3, MK 3 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Checks and maintenance

See other generations:
Video tutorial

This short and simple guide will show you how to open the bonnet of the Renault Scenic, following the instructions below. First, open the driver's side front door and begin pulling the bonnet release lever found at the bottom left; then move to the front to unclip the bonnet lock located in the centre, raising the bonnet as shown in the video.

At this point, secure the bonnet with the prop rod (or held by the hydraulic struts); finally, lower the bonnet to close it.


Posted on 6 April 2026 by ScegliAuto


Related tutorials

How to Open the Bonnet on a Renault Scenic
How to Open the Bonnet on a Renault Scenic
Renault Scenic (2016-2022 / Scenic IV, Scenic 4, MK IV, MK 4) A very simple operation that can often be tricky is opening the bonnet. Today, you will see step by step how to do this specifically on a Renault Sce…
How to Replace the Front Headlamp Bulb on a Renault Scenic
How to Replace the Front Headlamp Bulb on a Renault Scenic
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) To replace the bulb on a Renault Scenic, open the bonnet to access the components in the engine bay. Locate the bulb within the corresponding headlam…
Where to find and how to access the starter motor fuse of a Renault Scenic?
Renault Scenic (2016-2022 / Scenic IV, Scenic 4, MK IV, MK 4) Today, dedicate time to locating and accessing the starter motor fuse of your Renault Scenic. First, open the front bonnet. Once done, you will notic…

    Frequently Asked Questions

    • Scenic 2016-2022 - Where is the Renault Scenic parking brake fuse located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos