Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to tighten the armrest of the Renault Trafic

Model: Renault Renault Various

When the armrest of your car is no longer as rigid as when you purchased the car, it is not necessarily due to the breakage of the spring, perhaps the internal screw has simply loosened from not using it. Before proceeding with any other operation, therefore, remove the cover cap and then tighten the arm as much as possible with a 20mm Torx key. Test the operation of the armrest and once satisfied, reinsert the side cap. This operation can be done independently thanks to our short video tutorial and will only take a few minutes of your time.

Posted on 11 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service on Renault vehicles?
How to reset the service on Renault vehicles?
Renault Renault Various In this tutorial we can see how to reset the service in the Renault Trafic van, an extremely simple and quick operation, to be carried out only once …
Where is the OBD port located in the Renault Safrane 2011?
Where is the OBD port located in the Renault Safrane 2011?
Renault Renault Various In this new guide dedicated to all of you who own a 2011 Renault Safrane, we will help you find the OBD port located inside the cabin, through which …
How to remove the door panel of the Renault Thalia?
How to remove the door panel of the Renault Thalia?
Renault Renault Various Removing the left rear door panel of a Renault Thalia is a straightforward operation. To remove the panel, first open the door and unscrew the two ce…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos