Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cabin Fan in the Renault Koleos?

Model: Renault Koleos MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Blower motor

See other generations:
Video tutorial

In this tutorial, you will see how to remove the cabin fan in the Renault Koleos, a very simple and quick operation. First, ensure that the key is not inserted, then position yourself on the passenger side and open the glove compartment.

Next, unscrew all the screws indicated with a Torx T15 key, detach the drawer from the dashboard, and disconnect the internal light connector. At this point, disconnect the power connector of the fan, unscrew the fixing screws, and remove it from the housing.

To install the replacement, simply follow the reverse procedure.


Updated on 4 November 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper of the Renault Koleos
How to Remove the Rear Bumper of the Renault Koleos
Renault Koleos (2008-2015 / MK 1) Removing the rear bumper of your first-generation Renault Koleos may seem like a complex task that requires a professional's help. In reality, it is …
Replacement of the cabin air filter of the Renault Koleos.
Replacement of the cabin air filter of the Renault Koleos.
Renault Koleos (2016-2024 / MK 2) These short and simple steps will allow us to replace the cabin air filter of the Renault Koleos. First, we open the front door on the driver's side …
How to Replace the Cabin Filter on a Renault Koleos?
How to Replace the Cabin Filter on a Renault Koleos?
Renault Koleos (2008-2015 / MK 1) To replace the cabin filter on a Renault Koleos, loosen the screws securing the plastic panel of the dashboard located behind the footwell and on the…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos