Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Renault Clio?

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Service warning light

The Service light that is shown on the instrument panel of the Renault Clio can be reset by inserting the ignition key into the corresponding slot, turning it, and turning on the panel. Once it is turned on, you will need to navigate through the menu by repeatedly pressing the button on the top of the lever on the right side of the steering wheel. At this point, you can stop when the maintenance message appears: then you will need to hold down the button on the bottom of the lever to make the light disappear and then turn off the panel.

Posted on 17 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Renault Clio 2?
How to Reset the Service Light on a Renault Clio 2?
Renault Clio (1998-2005 / Clio 2, MK 2) On the Renault Clio 2, you can reset the Service light by turning on the ignition with the key in the ignition switch. Then, connect a diagnostic too…
How to Reset the Tyre Pressure Warning Light on a Renault Clio?
How to Reset the Tyre Pressure Warning Light on a Renault Clio?
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) To reset the tyre pressure warning light on a Renault Clio, first access the onboard computer menu. Before doing this, ensure the tyre pressures are …
How to reset the Service light on the Renault Clio?
How to reset the Service light on the Renault Clio?
Renault Clio (2019-2026 / Clio V, Clio 5) To reset the Service light on the Renault Clio, turn on the ignition and then press the menu button on the right side of the steering wheel (the one …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos