Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the sliding tailgate of the Renault Master?

Model: Renault Master MK 3 - Years 2010-2023
Part: Car door

In order to replace the sliding door of the Renault Master, you need to loosen the screws that secure it to its housing: to remove it, you will need to fully open the door and then loosen the screws located at the hinges. Once the old door is freed, you can remove it completely from its seat and insert the new one: this must be secured to the hinges with the appropriate screws that were just removed. After installation, you will need to verify that everything is functioning correctly.

Posted on 10 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Sliding Door Panel on a Renault Master
Renault Master (2010-2023 / MK 3) Here’s how to remove the handle from the tailgate on a Renault Master. To remove the lock, you need to take off the internal panel of the tailgate. O…
How to Change the Sliding Door Seal on a Renault Master III
How to Change the Sliding Door Seal on a Renault Master III
Renault Master (2010-2023 / MK 3) This video shows how to replace the sliding door seal on a Renault Master III. First, remove the damaged seal, which is not difficult: take it from o…
How do you adjust the sliding door of the Renault Master?
How do you adjust the sliding door of the Renault Master?
Renault Master (1997-2010 / MK 2) In order to adjust the sliding door on the Renault Master, you need to open it to locate the screws that are located at the hinges. Once you have ide…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos