Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Sliding Door Seal on a Renault Master III

Model: Renault Master MK 3 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Car door

See other generations:
Video tutorial

This video shows how to replace the sliding door seal on a Renault Master III. First, remove the damaged seal, which is not difficult: take it from one side and peel it off its support. You can find the new seal, for example, on eBay with code 266219095747 for £80.00 plus £12.00 shipping.

Start the installation by inserting the seal onto the body supports, pushing it in well; the most challenging part is where the door slides on the tracks, but by sliding the seal along with the rubber, as shown in the video, you can manage it. When connecting the two ends together, try to align them as closely as possible.


Updated on 10 August 2026 by ScegliAuto


Related tutorials

How do you adjust the sliding door of the Renault Master?
How do you adjust the sliding door of the Renault Master?
Renault Master (1997-2010 / MK 2) In order to adjust the sliding door on the Renault Master, you need to open it to locate the screws that are located at the hinges. Once you have ide…
How to Remove the Sliding Door Panel on a Renault Master
Renault Master (2010-2023 / MK 3) Here’s how to remove the handle from the tailgate on a Renault Master. To remove the lock, you need to take off the internal panel of the tailgate. O…
Replacement of the heating control unit on Renault Master III
Replacement of the heating control unit on Renault Master III
Renault Master (2010-2023 / MK 3) In this video we see how to replace the air conditioning control unit on a Renault Master III van: the youtuber had removed the control unit to chang…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos