Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the door panel and the window regulator motor of the Renault Modus

Model: Renault Modus MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Door trim panel

Video tutorial

Today we will discover the process of disassembling and replacing the door panel and window motor of the Renault Modus. First, we open the front door of the vehicle and start unscrewing all the fixing screws we find on the panel, as well as on the sides and on the handle; then we lever on the sides to detach it and remove it, as shown in the video.

At this point, it will be possible to disassemble the window motor, repairing it or replacing it with a new one; finally, we reassemble the door panel, making the electrical connection and the handle cable.


Posted on 21 December 2024 by ScegliAuto


Related tutorials

How to program and calibrate the window motor of the Renault Modus
How to program and calibrate the window motor of the Renault Modus
Renault Modus (2004-2013 / MK 1) In this guide we will see the instructions that will allow us to program and calibrate the power window motor of the Renault Modus. First, we get int…
How to replace the starter motor of the Renault Modus 1.5 dCi
How to replace the starter motor of the Renault Modus 1.5 dCi
Renault Modus (2004-2013 / MK 1) The following instructions will allow us to disassemble and replace the starter motor of the Renault Modus. First, we open the car's engine hood and …
How to Remove the Speaker from the Door Panel on a Renault Modus
How to Remove the Speaker from the Door Panel on a Renault Modus
Renault Modus (2004-2013 / MK 1) Learn how to remove the speaker located in the door panel on a Renault Modus. Before starting the disassembly, disconnect the battery terminals locat…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos