Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to lift the seat of the Renault Scenic

Model: Renault Scenic Scenic 3, MK 3, MK III, Scenic III - Years 2009-2015
Part: Seat

The Renault Scenic has six seats inside, two of which are located in the trunk and can be used when needed. The seats in the trunk are easy to assemble and disassemble thanks to their characteristics. To lift the seat, you will need to remove the undertray, unhooking it at the base and placing it in its proper compartment, and lift the red/orange strap. Once you have lifted the strap, you can pull the seat. Secure the seatbelt and in a few minutes you will have obtained your missing seat. To lower it, you will need to push down the headrest and then recline the seat.

Posted on 29 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Seat of the Renault Scenic
How to Remove the Front Seat of the Renault Scenic
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) In this brief guide, follow the instructions to remove and replace the driver's seat of the Renault Scenic. First, open the driver's front door and s…
How to recline the rear seat of the Renault Scenic
How to recline the rear seat of the Renault Scenic
Renault Scenic (2016-2022 / MK IV, Scenic 4, MK 4, Scenic IV) Today we will explain how to recline the rear seat of the Renault Scenic. To perform this simple maneuver on the seat, we must open the rear door and…
How to remove the stuck rear seat of a Renault Scenic MK2
How to remove the stuck rear seat of a Renault Scenic MK2
Renault Scenic (2003-2009 / MK 2, Scenic 2) We can see in this video how to remove the rear seat of a 2006 Renault Scenic. Like all rear seats, this one also rests on the rear wheels, so there …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos