Do it yourself
Frequently asked questions about cars and motorcycles

How to disassemble the fan of the Renault Megane II

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Blower motor

See other generations:
Video tutorial

In this video, we see how to solve the problem of the cabin fan not working on the Renault Megane II: we start by removing the lower part of the steering column, because we will also have to remove the pedals in order to reach the fan, which is located on the right side of the pedals themselves.

Unfortunately, there is no visibility at that point, so we will have to remove the lower part of the dashboard, on the door side, to see better, starting from the dashboard thickness cover, on the external side, and then gradually removing all the screws we find towards the steering column.

A good flashlight could also have been enough to properly illuminate the space where we need to work to remove the pedals, being very careful with the cables that are connected to the pedals. Now that the space is clear, we can remove the electrical connectors that connect to the fan and finally remove it. We discover that the fan was not working because it was full of dirt.

The youtuber does not replace it but cleans it carefully, and also cleans the space where it was located. Now all that remains is to put all the pieces back in place, but first we verify the functionality of the fan.


Posted on 4 January 2025 by ScegliAuto


Related tutorials

Renault Megane (2002-2010 / Megane 2) Follow these steps to remove and replace the cabin fan resistor on the Renault Megane. First, get into the vehicle on the passenger side and start by…
Renault Megane (2002-2010 / Megane 2) Removing the air fan on a Renault Megane, let’s see how to proceed. The cabin ventilation fan is located under the dashboard. Remove the covering pla…
Renault Megane (2002-2010 / Megane 2) In this brief and simple guide, you will learn how to remove and replace the cabin fan of the Renault Megane. First, get inside the vehicle and start…

    Frequently Asked Questions

    • Megane 2008-2015 - Where is the resistor of the passenger compartment fan of the Renault Megane 3? Read answer

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos