Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the door panel of the Renault Clio?

Model: Renault Clio Clio V, Clio 5 - Years 2019-2026
Part: Door trim panel

To remove the door panel of the Renault Clio, you need to loosen the screws that hold it to its housing: these screws will be located in the central lower part of the door, in the seat of the inner handle and immediately above the door pocket compartment. Once all these screws have been unscrewed, it will be possible to detach the panel and then disconnect the connectors below: this way the new panel can be inserted to verify that everything works correctly.

Posted on 22 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of the Renault Clio 4?
How to Remove the Door Panel of the Renault Clio 4?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) To remove the door panel of the Renault Clio, unscrew all the bolts that secure it: these are located on the inside of the panel, near the door handl…
How to Remove the Door Panel on a Renault Clio?
How to Remove the Door Panel on a Renault Clio?
Renault Clio (1998-2005 / Clio 2, MK 2) To replace the door panel on a Renault Clio, loosen the screws located at the internal handle, near the window switch, and all those at the bottom of…
How do you remove the rear door panel of the Renault Clio?
How do you remove the rear door panel of the Renault Clio?
Renault Clio (2019-2026 / Clio V, Clio 5) In order to remove the rear door panel of the Renault Clio, you first need to use a tool to pry off the window crank handle. Once this is removed, yo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos