Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of the Renault Clio 4?

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Door trim panel

To remove the door panel of the Renault Clio, unscrew all the bolts that secure it: these are located on the inside of the panel, near the door handles, close to the window switch, and at the bottom of the panel. Once all these screws have been removed, you can detach the panel, also disconnecting the underlying connector. After the old panel has been removed, you can insert a new replacement part, which should be properly connected to the connectors and secured with screws.

Updated on 15 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Door Panel of a Renault Clio
Removing the Door Panel of a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) In today's tutorial, you will learn how to remove the internal door panel of a Renault Clio. First, open the front door and start by removing all the…
Removing the Door Panel on Renault Clio 3
Removing the Door Panel on Renault Clio 3
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In today’s video tutorial, you will learn how to remove the door panel of a third-generation Renault Clio. First, open the door and remove the grab h…
Guide to Removing the Door Panel of the Renault Clio
Guide to Removing the Door Panel of the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) This guide shows you how to remove and replace the front door panel of the Renault Clio. First, open the front or rear door and start removing the pl…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos