Do it yourself
Frequently asked questions about cars and motorcycles

Use of the drilling kit for the Renault Clio 5

Model: Renault Clio Clio V, Clio 5 - Years 2019-2026
Part: Tires

In case of a puncture of one of the tires of the Renault Clio, we use the repair kit provided. We park the car in a safe position, turn on the hazard lights, signal our presence with a warning triangle, and wear the necessary equipment. We take the kit from the trunk, connect the canister of the product to the tire valve and the compressor, connect the electric cable to the accessory socket. We start the engine and turn on the compressor until reaching the pressure indicated on the table located on the driver's side door frame. If the correct pressure is not reached after 15 minutes, the repair is not possible. If everything went well, we disassemble everything, resume driving initially at no more than 60 km/h to distribute the product evenly, stop for a pressure check, and then go to the nearest professional for a permanent repair.

Posted on 31 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2019-2026 / Clio V, Clio 5) See how to fit seat covers for the Renault Clio V: start by removing the old seat covers, detaching the hooks and unzipping the old covers. Clean the…
Renault Clio (2019-2026 / Clio V, Clio 5) Installing an LED ambient lighting kit in your Renault Clio 5 Door is easier than you think! First, choose a kit with USB or 12V power. Start by remo…
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) The timing belt of the Renault Clio 4 must be replaced every 6 years or when it reaches 120,000 km as indicated by the manufacturer. To perform the r…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos