|
Do it yourself
| |||
| ||||
How to change the spark plugs on a Renault Kangoo 1
Model: Renault Kangoo
MK 1, KC, KW
- Years 1997-2008
Let's see how to change the spark plugs on a Renault Kangoo MK1: open the hood and remove the breather tube, then remove the clamp that secures the engine air filter housing to the throttle housing, with a flathead screwdriver, and remove the air filter, then disconnect the intake tube and remove the spark plug wire connectors from their sockets; remember the order of the spark plug wire connectors, writing the number on them if necessary. Remove dirt and dust from inside the spark plug sockets, and then remove them with a 14mm ratchet wrench, then remove them with a telescopic magnet. Apply anti-seize grease to the threads of the new spark plugs and then install them in the sockets, and tighten them with a torque wrench, tightening them to 25 Nm; reattach the spark plug connectors and reinstall the air filter, reconnecting the intake tube. Operation completed.
Posted on 16 February 2025 by ScegliAuto
Video tutorial
Related tutorials
Renault Kangoo
(1997-2008 /
MK 1, KC, KW)
Let's see how to change the spark plugs of the Renault Kangoo MK1: first of all, we will have to disconnect the battery and make sure that the engine…
Renault Kangoo
(1997-2008 /
MK 1, KC, KW)
Let's see how to change the spark plugs on a Renault Kangoo MK1: we can find them on auto-doc. It, Ridex brand at 2.59 euros each + 9.95 euros for de…
Renault Kangoo
(1997-2008 /
MK 1, KC, KW)
In this video, you will see how to remove and replace the glow plugs on a Renault Kangoo 1.5 DCI, as well as on other models from the manufacturer. F…
Other guides you may be interested in
|
Where is the Fuel Filter Located in a Volvo XC60?
In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.124
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |