Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure warning light on the Renault Arkana?

Model: Renault Arkana MK 1 - Years 2019-2026
Part: Tire pressure warning light

In order to reset the tire pressure warning light on the Renault Arkana, you must inflate the tires to the recommended pressure value: this value is indicated on the sticker located on the driver's side door pillar. Once the tires have been properly inflated, you can navigate through the menu displayed on the instrument panel until you find the option related to tire pressure: once this option is located, you must press and hold the OK button located on the right side of the steering wheel to turn off the warning light.

Posted on 11 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light in the Renault Arkana
How to Reset the Tyre Pressure Light in the Renault Arkana
Renault Arkana (2019-2026 / MK 1) In today's video, you will see how to reset the tyre pressure light and how to reset the parameter in the Renault Arkana. First, after the message ap…
How to reset the tire pressure sensor of the 2023 Renault Arkana
How to reset the tire pressure sensor of the 2023 Renault Arkana
Renault Arkana (2019-2026 / MK 1) To complete the manual tire pressure monitoring system reset procedure for your 2023 Renault Arkana, you must follow the procedure described in the f…
How to reset the tire pressure sensor of the 2023 Renault Arkana
How to reset the tire pressure sensor of the 2023 Renault Arkana
Renault Arkana (2019-2026 / MK 1) Completing the manual reset of the tire pressure warning light on your Renault Arkana (year 2023) is really simple and you just need to follow these …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos