Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the rear tailgate panel of the Renault Megane II

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Car door

Let's see how to remove the rear hatch cover of a Renault Megane II: we will need a 20 mm Torx socket, with which we will remove the four screws that hold the plastic cover of the hatch: two of these are located inside the handles used to pull down the hatch when it is lifted. Now, with a screwdriver, remove the cover of the locking mechanism. Now lever all around the hatch - starting from the top - in order to remove the plastic cover. We must act with delicacy, especially in the area around the lock; also pay attention to the sound-absorbing material inside the panel.

Posted on 12 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Renault Megane (2002-2010 / Megane 2) In this video tutorial, you will learn how to remove and replace the tailgate panel of the Renault Megane in simple and quick steps. First, open the …
Renault Megane (2008-2015 / Megane III, Megane 3) As shown in this tutorial, dismantling the rear light on a Renault Megane to replace, for example, a bulb is a very simple and quick operation. Befor…
Renault Megane (2002-2010 / Megane 2) Today, we will see the main instructions for dismantling and replacing the rear light of the second series Renault Megane in simple and quick steps. …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos