Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Tailgate Panel of the Renault Megane

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Door trim panel

In this video tutorial, you will learn how to remove and replace the tailgate panel of the Renault Megane in simple and quick steps. First, open the boot and begin by removing the plastic trim at the top of the tailgate, using a thin tool to pry it off the sides. Next, unscrew all the fastening screws located on the sides of the panel, as shown in the video. At this point, pry off the sides of the panel to detach and remove it, replacing the lock if necessary; apply the reverse procedure for reassembly!

Updated on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear tailgate panel of the Renault Megane II
How to remove the rear tailgate panel of the Renault Megane II
Renault Megane (2002-2010 / Megane 2) Let's see how to remove the rear hatch cover of a Renault Megane II: we will need a 20 mm Torx socket, with which we will remove the four screws that…
How to Replace the Rear Wiper Blade on a Renault Megane
How to Replace the Rear Wiper Blade on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Before you start, exit the cabin of your Renault Megane and head to the rear hatch. Begin by lifting the entire wiper arm, which will also raise the …
How to Remove the Rear Lights from the Tailgate on the Renault Megane?
How to Remove the Rear Lights from the Tailgate on the Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) In this tutorial, you will see how to remove the rear lights from the tailgate on the Renault Megane, a very simple operation, allowing you to replac…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos