Do it yourself
Frequently asked questions about cars and motorcycles

How to change the engine oil of a Renault Megane?

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Engine oil

To change the motor oil of a Renault Megane, start by lifting the car with a jack and placing safety stands under the vehicle. Once lifted, locate the oil drain plug, which is usually located under the engine. Place a suitable container under the plug to collect the old oil. Remove the drain plug and let the old oil drain into the container. After all the oil has been drained, screw the drain plug back on and make sure it is securely tightened. Then, find the oil filler cap, which is located on the top of the engine. Remove the cap and use a funnel to pour in the new motor oil. Make sure to use the recommended oil in the owner's manual. After adding the right amount of oil, replace the filler cap and start the engine for a few minutes, allowing the oil to circulate. Check the oil level again and add more oil if necessary. Finally, lower the car and check for any leaks under the engine.

Posted on 21 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Renault Megane (2015-2023 / Megane 4, Megane IV) In this video we see how to change the motor oil of a Renault Megane IV: first we open the refueling cap inside the engine compartment, then we move …
Renault Megane (1995-2003 / Megane 1) Today, I will explain how to change the engine oil and oil filter on your Renault Megane. It is not a very complex operation; just take some care, an…
Renault Megane (2008-2015 / Megane III, Megane 3) To change the engine oil on a Renault Megane, you need to lift the vehicle with a jack or ramp to access the drain plug of the oil sump, located at t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos