Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuse box of the Renault Triber located?

Model: Renault Renault Various
Part: Fuse box

If you want to find the fuse box inside your Renault Triber, all you have to do is carefully read the following guide and follow all the steps described. First of all, the car must be parked on a flat surface and completely turned off for safety reasons. Once you have taken these two simple precautions, you can lift the front hood and locate the fuse box on the right side of the engine compartment. After you have located the fuse box of your Renault Triber, all you have to do is remove the protective cover and you are done.

Posted on 30 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located in the Renault Triber?
Where is the fuse box located in the Renault Triber?
Renault Renault Various The 2023 Renault Triber has two fuse boxes inside. The first fuse box is located inside the front hood, while the second fuse box is located inside t…
Where are the fuses located in the Renault Triber?
Where are the fuses located in the Renault Triber?
Renault Renault Various The fuses of the Renault Triber are located inside the appropriate fuse boxes that are installed on the vehicle: in this type of car, it will be poss…
Where are the fuses located in the Renault Triber?
Where are the fuses located in the Renault Triber?
Renault Renault Various Inside the Renault Triber, the fuse boxes that are present have the task of containing the fuses that regulate the operation of the devices on the ve…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos