Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of the Renault Trafic 3

Model: Renault Trafic MK 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Tail light bulb

See other generations:
Video tutorial

Today we will explain how to replace the rear headlight bulb on a Renault Trafic 3 vehicle. To replace the bulb, we need to open the trunk and use a flathead screwdriver to unscrew the screws on the side of the headlight.

After removing the screws, being careful with the connector, we remove the headlight from its housing. Disconnect the connector to open the headlight dome and proceed with replacing the damaged bulbs.

After replacing the bulbs, close the dome and connect the headlight to the connector. Insert the headlight back into its housing and tighten the side screws.


Posted on 1 April 2025 by ScegliAuto


Related tutorials

Replacing the Position Light Bulb on a Renault Trafic
Replacing the Position Light Bulb on a Renault Trafic
Renault Trafic (2014-2026 / MK 3) When the position light bulb on your Renault Trafic burns out, replace it as soon as possible for your safety and to avoid penalties. Open the bonnet…
How to Replace the Side Indicator on the Renault Trafic 2016
How to Replace the Side Indicator on the Renault Trafic 2016
Renault Trafic (2014-2026 / MK 3) If one of the side indicators on your 2016 Renault Trafic has suddenly stopped working, don't worry because with the following guide you will be able…
How to Replace the Rear Headlamp Bulb on a Renault Trafic?
How to Replace the Rear Headlamp Bulb on a Renault Trafic?
Renault Trafic (2014-2026 / MK 3) To replace the headlamp bulb on the Renault Trafic, first open the tailgate and loosen the screws located near the seal. After loosening the screws, …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos