Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Display on a Renault Megane

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Onboard computer

How to remove the onboard computer from your Renault Megane? Watch this video to see how to proceed with the disassembly: using a thin screwdriver or a plastic lever, pry between the trim of the onboard computer (frame with the embedded display) and the dashboard as shown in the video. Pull away the plastic trim previously removed from the dashboard, then disconnect the onboard computer from its trim (unplug the various power connectors located at the back). To reassemble the various disassembled pieces, proceed in reverse order of the disassembly operations.

Updated on 3 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Instrument Cluster Display on a Renault Megane
Removing the Instrument Cluster Display on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) In this video tutorial, you will learn how to remove the display of the instrument cluster on a Renault Megane. First, get inside the car and use app…
How to Reset the Service Light on a Renault Megane?
How to Reset the Service Light on a Renault Megane?
Renault Megane (2015-2023 / Megane 4, Megane IV) You can clear the Service light from the display of a Renault Megane by inserting the ignition key into the ignition switch and turning it to activat…
How to reset the service light on the Renault Megane 3
How to reset the service light on the Renault Megane 3
Renault Megane (2008-2015 / Megane III, Megane 3) If the service light appears on the small display of the instrument panel of your third-generation Renault Megane even after performing the car's ser…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos