Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to check the oil level on a Renault Clio MK3

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Engine oil

In this video we see how to check the oil level on a Renault Clio MK3: the vehicle must be with the engine off and cold and parked on a flat surface; we pull the hood release lever and open it by positioning the support rod. We extract the oil level dipstick, highlighted by a yellow circle just below the engine block; we dry it with a piece of absorbent paper and then put it back in; we extract it again and check the level, which should be close to "max" without ever exceeding it. If necessary, we top up the oil by opening the cap on the left, and pour the oil making small adjustments, then check the level again. We close the hood, making sure it is properly locked.

Posted on 23 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Check and Top Up the Oil Level in a Renault Clio?
How to Check and Top Up the Oil Level in a Renault Clio?
Renault Clio (2019-2026 / Clio V, Clio 5) This video tutorial shows the correct procedure to check the oil level and how to top up the oil. The procedure for topping up the oil is: first, all…
How to check the coolant level on the Renault Clio
How to check the coolant level on the Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this video, we see how to check the coolant level of a Renault Clio: first, the vehicle must be turned off and cold, and it must be on a flat surf…
How to Replace Oil and Filter on Renault Clio
How to Replace Oil and Filter on Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) How to replace oil and filter on Renault Clio? Follow these steps: lift the bonnet and secure it, then raise the car on a column lift or jack, unscre…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos