Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Renault Kangoo?

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part: Service warning light

It will be possible to completely eliminate the Service light that is shown on the instrument panel of the Renault Kangoo by inserting the ignition key into the corresponding slot, so that it can be inserted to turn on the instrument panel. Once the panel is turned on, it will be possible to hold down the button at the end of the lever to the right of the steering wheel. By keeping it pressed, the Service light will start flashing, until it is completely reset and the maintenance interval is reset. To verify that the reset has been done correctly, it will be necessary to turn off and then reactivate the instrument panel.

Posted on 21 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Service light on the Renault Kangoo?
How to reset the Service light on the Renault Kangoo?
Renault Kangoo (2007-2021 / MK 2, FC, FW) To reset the Service light on the Renault Kangoo, insert the ignition key into the ignition switch so that you can turn it to power on the instrument…
How to Reset the Service Light on a Renault Kangoo?
How to Reset the Service Light on a Renault Kangoo?
Renault Kangoo (2007-2021 / MK 2, FC, FW) Here’s how to reset the Service light on a Renault Kangoo, noting that the method shown in this video is also valid for other Renault cars. The light…
How to reset the Service light on the Renault Kangoo?
How to reset the Service light on the Renault Kangoo?
Renault Kangoo (1997-2008 / MK 1, KC, KW) To reset the Service light on the Renault Kangoo, turn on the instrument panel by rotating the key in the ignition switch: once it is on, press and h…

Other guides you may be interested in

    Frequently Asked Questions

    • Kangoo 2007-2021 - Why does the Renault Kangoo service light come on? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos