Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulb of the Renault Twingo

Model: Renault Twingo Twingo 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Headlight bulb

See other generations:
Video tutorial

These brief instructions will allow us to disassemble and replace the headlight bulb of the Renault Twingo, in simple steps. First, we open the car's engine hood and start removing the plastic cover cap of the bulbs; it is possible to remove both the position bulb and the low/high beam bulb, of type H4, by disconnecting the electrical connector.

At this point, we install the new low beam bulb and if necessary also the position bulb, checking its operation; finally, we reassemble the plastic cover cap for protection!


Posted on 26 June 2025 by ScegliAuto


Related tutorials

How do you replace the front headlight bulb of the Renault Twingo?
How do you replace the front headlight bulb of the Renault Twingo?
Renault Twingo (2007-2014 / Twingo 2) To replace the headlight bulb of the Renault Twingo, you need to open the hood so that you can access the inner area of the corresponding optical gro…
How to Replace the Headlight Bulb on a Renault Twingo
How to Replace the Headlight Bulb on a Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) Before starting, open the front bonnet of your Renault Twingo. Begin by unfastening the clip that secures the inner cover of the blown bulb, then mov…
How to replace the front fog light bulb of the Renault Twingo.
How to replace the front fog light bulb of the Renault Twingo.
Renault Twingo (2007-2014 / Twingo 2) The steps to replace the front headlight bulb of the Renault Twingo 2 is a simple and quick operation that can be done independently. First, turn off…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos