Do it yourself
Frequently asked questions about cars and motorcycles

How to clean the cooling liquid of the Renault Megane 2 diesel

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Antifreeze coolant

See other generations:
Video tutorial

Today we will explain how to flush the cooling liquid tank of the Renault Megane diesel model 2. We start the cleaning process by opening the front hood and removing the engine cover; to empty the liquid we must open the tank cap and place a container under the vehicle, so that the liquid can drain out. We lift the vehicle and remove the oil filter that is connected to the radiator, when the liquid stops flowing we insert the tube.

We lower the vehicle and pour the liquid into the tank.

After closing the cap, we start the vehicle to ensure that the liquid circulates before driving. We turn off the vehicle and remove the drain plug.

We pour more liquid into the tank and insert the plug.


Posted on 26 July 2025 by ScegliAuto


Related tutorials

Renault Megane (2002-2010 / Megane 2) In the video, we see the disgusting sludge formed by the oil mixing with the coolant in a Renault Megane II. This problem can be caused by a crack in…
Renault Megane (2015-2023 / Megane IV, Megane 4) Before you can start, sit in the driver's seat of your Renault Megane 1.6 diesel. Connect your laptop to the car and launch the specific software. Ne…
Renault Megane (2008-2015 / Megane III, Megane 3) In this tutorial we can see how to replace the thermostat in the Renault Megane, a simple operation but one that requires good manual skills. First o…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos