Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the stabilizer bar link of the Renault Kangoo II

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part: Anti-roll bar

In this video, we will see how to replace the stabilizer bar links (or anti-roll bar) of the Renault Kangoo II: we will need to remove the front wheels and lift the front part of the vehicle. The link connects the stabilizer bar to the shock absorbers, in order to keep the wheels always pressed to the ground; often these elements are stuck, so we need to clean them with a wire brush and then spray them with WD-40: then we detach the upper head of the stabilizer bar: it may be necessary to lift the hub carrier to properly remove the link; this will also allow us to remove the lower nut. Now we can insert the new one starting from the bottom, lift the hub carrier again and insert the upper nut. After the nuts have been tightened, we can lower the car and reassemble the wheels, the operation is completed.

Posted on 2 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front stabilizer bar link on a Renault Kangoo I
How to replace the front stabilizer bar link on a Renault Kangoo I
Renault Kangoo (1997-2008 / MK 1, KC, KW) Let's see how to replace the stabilizer bar links on the Renault Kangoo I: we will need to lift the vehicle at its front, removing the front wheels; …
How to Replace the Front Shock Absorbers on a Renault Kangoo II
How to Replace the Front Shock Absorbers on a Renault Kangoo II
Renault Kangoo (2007-2021 / MK 2, FC, FW) Replacing the front shock absorbers on a Renault Kangoo is a somewhat complex job that requires specific equipment, namely a suspension spring compre…
Replacement of the cabin air filter of the Renault Kangoo 2
Replacement of the cabin air filter of the Renault Kangoo 2
Renault Kangoo (2007-2021 / MK 2, FC, FW) In this video we see how to proceed to replace the cabin filter of the Renault Kangoo 2. Using a plastic lever, we detach the boot at the base of the…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos