Do it yourself
Frequently asked questions about cars and motorcycles

How to clean the EGR valve of a Renault Clio IV

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: EGR valve

Let's see how to clean the EGR valve of a Renault Clio IV: lift the car at its front. The EGR is in an awkward position, and to access it we must remove the air flow meter sheath, the turbo air duct, the ventilation tube, and the lower part of the turbo duct. To disassemble the EGR valve, we must disconnect the electrical connector of the valve, unscrew the 3 fixing bolts with a 10mm wrench, disconnect the coolant tube (some liquid may come out). The valve is often stuck due to carbon deposits. Spray some lubricating grease, such as LiquiMoly Tacky Lube spray, which can be found on eBay with code 202479195660 at a price of 15.90 euros, free delivery. Once it is free, remove the valve and its inlet duct if necessary (unscrewing two more 10mm bolts). Remove the metal gasket from the valve, generously spray the specific cleaner (again LiquiMoly but Ansaug-System-reiniger with code 202479232689 at a price of 28.50 euros, free delivery, also on eBay). Rub and brush until the metal surfaces are clean; also clean the EGR inlet duct on the manifold. When reassembling, install a new gasket, put the valve back in place, reconnect the coolant tube, screw in the 3 fixing bolts, reconnect the electrical connector, and reassemble all the components that were previously removed, in reverse order. Lower the car, start the engine.

Posted on 10 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) The EGR valve on the Clio III 1.5 dCi tends to clog with carbon, causing a loss of power and engine warning light. To clean it, remove the intake man…
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) How to remove the EGR valve on a Renault Clio? Lift the bonnet and secure it; using a screwdriver, unscrew the locking pins of the ventilation pipe a…
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) As shown in the video, open the engine bay of your Renault Clio 3 1.5 dCi and remove the engine cover. At this point, you will see the EGR valve conn…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos