Do it yourself
Frequently asked questions about cars and motorcycles

How to Clean the EGR Valve of a Clio 3 1.5 dCi

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Checks and maintenance

See other generations:
Video tutorial

As shown in the video, open the engine bay of your Renault Clio 3 1.5 dCi and remove the engine cover. At this point, you will see the EGR valve connected to the intake pipe.

This valve is designed to burn unused gases from the diesel engine and gets dirty quite frequently, so it is advisable to keep it clean regularly. Using a small flat screwdriver, disconnect the connector.

The valve is secured by three bolts, one of which is located behind the valve itself, making it more difficult to remove. Use an 8mm spanner.

Extract the valve and the intake duct as well. Clean with a suitable degreaser several times until fully clean.

Refit everything.


Updated on 4 August 2026 by ScegliAuto


Related tutorials

Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) The EGR valve on the Clio III 1.5 dCi tends to clog with carbon, causing a loss of power and engine warning light. To clean it, remove the intake man…
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) To replace the EGR valve on the Renault Clio 1.4 dCi, open the bonnet to access the engine compartment. The valve is located at the top of the engine…
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) To remove and replace the EGR valve on the vehicle, follow these steps: open the bonnet, loosen the hose clamp securing the air intake pipe from the …

Other guides you may be interested in

    Frequently Asked Questions

    • Clio 2012-2019 - What to do if the traction control on a Renault Clio does not start? Read answer
    • Clio 2012-2019 - Why is the Renault Clio USB port not working? Read answer
    • Clio 2012-2019 - Why does the touch screen not work in the Renault Clio? Read answer
    • Clio 2005-2013 - Where is the horn of a Renault Clio located? Read answer

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos