Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the EGR Valve on a Renault Clio 1.5 dCi

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: EGR valve

To remove and replace the EGR valve on the vehicle, follow these steps: open the bonnet, loosen the hose clamp securing the air intake pipe from the filter to the turbo, then unscrew the bolts securing the inlet pipe to the turbo. Once the pipe is removed, you will have access to the valve. First, disconnect the electrical connector. At this point, once the bolts securing it to the engine are removed, use a hammer to help loosen it and rotate it left and right. Finally, extract it completely.

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Clean the EGR Valve on a Renault Clio III 1.5 dCi
How to Clean the EGR Valve on a Renault Clio III 1.5 dCi
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) The EGR valve on the Clio III 1.5 dCi tends to clog with carbon, causing a loss of power and engine warning light. To clean it, remove the intake man…
How to Clean the EGR Valve of a Clio 3 1.5 dCi
How to Clean the EGR Valve of a Clio 3 1.5 dCi
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) As shown in the video, open the engine bay of your Renault Clio 3 1.5 dCi and remove the engine cover. At this point, you will see the EGR valve conn…
How to Replace the EGR Valve on the Renault Clio 1.5 dCi?
How to Replace the EGR Valve on the Renault Clio 1.5 dCi?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) To replace the EGR valve on the Renault Clio 1.4 dCi, open the bonnet to access the engine compartment. The valve is located at the top of the engine…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos