Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the connections from the Renault and Dacia 1.5 DCI gearbox

Model: Renault Renault Various
Part: Checks and maintenance

Video tutorial

In this video we see how to remove the connection cables of the gear shift of various Renault and Dacia cars with the 1.5 DCi engine. They seem to be stuck in a position from which they cannot be removed, but in reality it is possible to move them from their housing with long-nosed pliers, carefully disconnecting the connector from the ball joint, which should simply pop off. When we then go to replace them, just push them back into position with the same system.

However, the youtuber does not give us an indication of which cable is for reverse gear and which one is for forward gears.


Posted on 16 September 2025 by ScegliAuto


Related tutorials

Inside a Renault 1.5 dCI K9K Engine
Inside a Renault 1.5 dCI K9K Engine
Renault Renault Various In this video, see the internal structure of a Renault 1.5 dCI K9K engine, which is fitted in various vehicles (including Nissan, Dacia, Mercedes). W…
When and How Should I Change the Timing Belt on My Renault with a 1.5 DCI Engine?
Renault Renault Various Following this short video, you will learn how and when to change the timing belt on your Renault with a 1.5 DCI engine, but the same procedure appli…
Reliability of the 1.5 Dci Renault Engine
Reliability of the 1.5 Dci Renault Engine
Renault Renault Various In the video, we hear the opinions of YouTubers about the 1.5 Dci Renault engine, which has covered 87,500 miles and has performed very well. This en…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos