Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust the beam of light on a Renault Clio IV

Model: Renault Clio MK 4, Clio 4, Clio IV - Years 2012-2019
Part: Headlight

In this video, we see how to adjust the beam of light on a Renault Clio IV: we will need an 8mm socket or a 7mm hexagonal wrench. It is advisable to perform this operation in a dark place, with the vehicle positioned in front of a wall at a distance of about ten meters, in order to verify the correct adjustment; however, we must first ensure that the surface where the car is parked is flat and that the tires are properly inflated. As we see in the video, behind each headlight there is a screw for vertical adjustment and one for horizontal adjustment, in order to adjust the height and direction of the beam of light.

Posted on 17 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you adjust the headlights of the Renault Clio?
How do you adjust the headlights of the Renault Clio?
Renault Clio (2019-2026 / Clio 5, Clio V) It will be possible to adjust the headlights of the Renault Clio by first inserting the ignition key into the lock in order to activate the instrumen…
How to adjust the headlights of the Renault Clio - Captur
How to adjust the headlights of the Renault Clio - Captur
Renault Clio (2012-2019 / MK 4, Clio 4, Clio IV) In this guide we will see the instructions that will allow us to adjust the headlights of the Renault Clio, but also of the Captur. First of all, we …
What is the headlight adjustment screw for the Renault Clio 3?
What is the headlight adjustment screw for the Renault Clio 3?
Renault Clio (2005-2013 / Clio 3, Clio III, MK 3) Adjusting the headlight beam of a car, not only for the Renault Clio 3, which is the vehicle shown in the video, but for most cars on the market, is …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos