Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin fan of the Renault Modus

Model: Renault Modus MK 1 - Years 2004-2013
Part: Blower motor

Today's instructions will allow us to disassemble and replace the cabin fan of the Renault Modus. First, we get on board the cabin and start disassembling and removing the glove box, then removing the lower plastic cover; then we unscrew the screws of the cabin fan and disconnect its power connector, as shown in the video. At this point, we carry out the repair or replacement of the cabin fan with the new one, first testing its operation; finally, we reassemble all the previously disassembled components.

Posted on 25 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Glove Compartment and Cabin Fan on a Renault Modus
How to Remove the Glove Compartment and Cabin Fan on a Renault Modus
Renault Modus (2004-2013 / MK 1) Here are the steps to remove and replace the glove compartment and cabin fan on a Renault Modus. First, get inside the vehicle and open the glove com…
How to replace the cabin fan in the Renault Modus?
How to replace the cabin fan in the Renault Modus?
Renault Modus (2004-2013 / MK 1) In this tutorial, we can see how to replace the cabin fan in the Renault Modus, an extremely simple and quick operation. First of all, make sure that…
How to replace the cabin fan of the Renault Modus
How to replace the cabin fan of the Renault Modus
Renault Modus (2004-2013 / MK 1) The instructions in this guide will show us how to disassemble and replace the cabin fan of the Renault Modus. First, we open the front passenger doo…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos