Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the taillights on the Renault Master van?

Model: Renault Master MK 2 - Years 1997-2010
Part: Tail light

In this tutorial we can see how to replace the rear lights in the Renault Master van, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can work safely. Then open the rear door, locate the screw located on the inner edge of the light in question and unscrew it using a Torx T27 key. Next, grab the light, pull it outward and separate it from the bodywork. At this point, all that remains is to disconnect the power connector, replace the faulty element and reassemble everything following the reverse procedure.

Posted on 1 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear lights on the Renault Master van?
Renault Master (2010-2023 / MK 3) In this tutorial we can see how to replace the rear lights in the Renault Master van, an extremely simple and quick operation. First of all, make sur…
How to replace the air filter in the Renault Master van?
How to replace the air filter in the Renault Master van?
Renault Master (2010-2023 / MK 3) In this tutorial, we can see how to replace the air filter in the Renault Master van, an extremely simple and quick operation. First of all, make sur…
How to Replace the Radiator in the Renault Master Van
How to Replace the Radiator in the Renault Master Van
Renault Master (2010-2023 / MK 3) In this tutorial, you will see how to replace the radiator in the Renault Master van, a task that requires good manual skills. First, open the bonnet…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos