Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear lights on the Renault Master van?

Model: Renault Master MK 3 - Years 2010-2023
Part: Tail light

In this tutorial we can see how to replace the rear lights in the Renault Master van, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can work safely, then open the rear door and remove the plastic cover on the back of the light in question. Next, locate the two fixing nuts, unscrew them using a 10mm socket wrench, and, pulling it outwards, separate the light from the bodywork. At this point, all that remains is to disconnect the power connector, replace the faulty element, and reassemble everything.

Posted on 7 June 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

How to replace the taillights on the Renault Master van?
How to replace the taillights on the Renault Master van?
Renault Master (1997-2010 / MK 2) In this tutorial we can see how to replace the rear lights in the Renault Master van, an extremely simple and quick operation. First of all, make sur…
How to Reset the Service Light on the Renault Master Van?
How to Reset the Service Light on the Renault Master Van?
Renault Master (1997-2010 / MK 2) In this tutorial, we can see how to reset the service light on the Renault Master van, a very simple and quick operation to be performed only after c…
How to Reset the Service on a Renault Master Van
How to Reset the Service on a Renault Master Van
Renault Master (2010-2023 / MK 3) In this tutorial, we will see how to reset the service on a Renault Master van, a very simple and quick operation to perform only after completing al…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos