Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Renault Twingo

Model: Renault Twingo Twingo 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Door trim panel

See other generations:
Video tutorial

To remove the door panel (front right) of a Renault Twingo: disconnect the battery terminals located in the engine compartment. Using a screwdriver, unscrew the fastening screws located in the handle area.

Remove the plastic from the handle with the window switch; unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and disconnect it from the door (unplug the power wiring and the opening cable).

Carry out the desired maintenance inside the door.


Updated on 6 March 2026 by ScegliAuto


Related tutorials

How to Remove the Window Switch Button on Renault Twingo
How to Remove the Window Switch Button on Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) How to remove the window switch button located in the driver’s door panel of a Renault Twingo? This guide explains the procedure; before starting the…
Location and Diagram of the Fuse Box on Renault Twingo
Location and Diagram of the Fuse Box on Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) The fuse box for the cabin is located inside the glove compartment on the Renault Twingo. Here you will find, for example, the fuse that controls the…
How to Remove the Rear Seats on the Renault Twingo
How to Remove the Rear Seats on the Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) This tutorial shows how to remove the rear seats on the Renault Twingo, an extremely simple and quick operation. First, open both doors, then move th…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos