Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Why are position and stop lights not replaceable on the Renault Kadjar?

Model: Renault Kadjar MK 1 - Years 2015-2022
Part: Tail light

In this very short video we can see that on the Renault Kadjar the position and stop lights are not replaceable separately, because they are made with LED diodes soldered onto an electronic board; this LED board is in turn integrated into a single module that constitutes the rear light cluster. The LEDs are designed to last tens of thousands of hours, often more than the life of the car itself. Manufacturers therefore consider them "lifetime" components, not subject to regular maintenance. In fact, the light cluster is sealed to protect delicate electronic components from moisture, dust, and vibrations. Instead, turn signals, reverse lights, and fog lights are normally replaceable.

Posted on 17 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Disable the Start&Stop on the Renault Kadjar?
How to Disable the Start&Stop on the Renault Kadjar?
Renault Kadjar (2015-2022 / MK 1) To disable the Start&Stop on the Renault Kadjar, start the engine by inserting the key into the ignition switch and then pressing the button located …
How to Activate and Deactivate the Start&Stop System of the Renault Kadjar
How to Activate and Deactivate the Start&Stop System of the Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) Below are the instructions that will allow you to activate and deactivate the Start&Stop system of the Renault Kadjar in simple steps. First, get in …
How to Disable Start&Stop on a Renault Kadjar?
How to Disable Start&Stop on a Renault Kadjar?
Renault Kadjar (2015-2022 / MK 1) To disable the Start&Stop feature on a Renault Kadjar, turn on the engine by inserting the key into the ignition switch and then pressing the button …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos