Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the windshield wiper blades of the Renault Scenic

Model: Renault Scenic Scenic 3, MK 3, MK III, Scenic III - Years 2009-2015
Part: Windshield wipers

Replacing the windshield wiper blades is a very simple and quick operation to perform independently. Specifically today we will see how to replace the blades of a Renault Scenic windshield wiper. To perform the replacement, we need to activate the windshield wipers and position them vertically. Remove the top part of the windshield wiper by lifting the clip and sliding the blade out. Repeat the same operation on the left windshield wiper. Slide the new blade inside the windshield wiper and lower the clip. Repeat the same operation on the left windshield wiper.

Posted on 1 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the wiper blades on the Renault Scenic 2
How to replace the wiper blades on the Renault Scenic 2
Renault Scenic (2003-2009 / MK 2, Scenic 2) Replacing the windshield wiper blades on the Renault Scenic model 2 is a simple and quick operation to be carried out independently. First, lift the …
How to Replace the Front Wipers on a Renault Scenic
How to Replace the Front Wipers on a Renault Scenic
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) Today's steps will show you how to remove and replace the front wipers on a Renault Scenic, following the instructions below. First, lift the wiper a…
How to replace the wipers of the Renault Scenic?
How to replace the wipers of the Renault Scenic?
Renault Scenic (1993-2003 / Scenic 1, MK 1, RX4) Replacing the front wipers of the Renault Scenic is a simple operation that can be done independently. To replace the wipers, we must: - put the wipe…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos