Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery in the Renault Austral remote control?

Model: Renault Austral MK 1 - Years 2022-2026
Part: Key

In this tutorial, we will see how to replace the battery of the Renault Austral remote control, an operation that is extremely simple and quick. To do this, we will need a small flathead screwdriver and a replacement battery of type CR2032. First, we grab the rear cover of the remote control and then slide it towards the bottom side until it is completely disengaged. Next, we open the newly freed cap, remove the old battery, and insert the replacement, making sure to respect the polarity. To reassemble everything, just follow the reverse procedure.

Posted on 5 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the 2025 Renault Austral.
How to reset the service light on the 2025 Renault Austral.
Renault Austral (2022-2026 / MK 1) To manually reset the service light of your new 2025 Renault Austral, simply follow the procedure outlined in this new guide. First, you need to get …
How to Reset the Tyre Pressure Light on a Renault Austral?
How to Reset the Tyre Pressure Light on a Renault Austral?
Renault Austral (2022-2026 / MK 1) In this tutorial, you will see how to reset the tyre pressure light on a Renault Austral, a very simple and quick operation to perform only after res…
In the Renault Austral, how do you reset the partial odometer?
In the Renault Austral, how do you reset the partial odometer?
Renault Austral (2022-2026 / MK 1) To perform some checks, for example the distance traveled from a certain location to a certain destination or something else, we can reset the partia…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos