Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin air filter of the Renault Austral

Model: Renault Austral MK 1 - Years 2022-2026
Part: Cabin air filter

If you need a guide to help you complete the replacement of the cabin air filter in your Renault Austral, then all you have to do is read the following instructions and put them into practice. First, you need to reach the front passenger seat, then open the glove compartment and act on the side hooks to remove it completely. Once you have done this, locate the box containing the air filter you want to replace and remove the protective cover. Finally, replace the old filter with the new one.

Posted on 3 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter on the Renault Austral
How to Replace the Cabin Filter on the Renault Austral
Renault Austral (2022-2026 / MK 1) You can replace the cabin filter on the Renault Austral by opening the glove compartment located on the passenger side. This will allow you to loosen…
How to Reset the Tyre Pressure Light on a Renault Austral?
How to Reset the Tyre Pressure Light on a Renault Austral?
Renault Austral (2022-2026 / MK 1) In this tutorial, you will see how to reset the tyre pressure light on a Renault Austral, a very simple and quick operation to perform only after res…
How to reset the multimedia system in the Renault Austral?
How to reset the multimedia system in the Renault Austral?
Renault Austral (2022-2026 / MK 1) In this tutorial we can see how to reset the multimedia system in the Renault Austral, an extremely simple and quick operation, to be carried out for…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos