Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire warning light on the 2024 Renault Kangoo.

Model: Renault Kangoo FFK, KFK, MK 3 - Years 2020-2026
Part:

To independently reset the tire warning light on your Renault Kangoo (2024), simply follow the guide below and apply the various steps. Once inside the cabin, start the car and use the infotainment system to access the information menu. Next, click on the tire icon and proceed with the manual reset of the warning light. Once the operation is completed correctly, you can exit the onboard menu screen and completely turn off the vehicle. If there are any errors, repeat the procedure from the beginning.

Posted on 22 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light on the Renault Kangoo?
How do you reset the tire pressure warning light on the Renault Kangoo?
Renault Kangoo (2007-2021 / FW, FC, MK 2) To reset the tire pressure warning light on the Renault Kangoo, you need to turn on the instrument panel by inserting the ignition key into the corre…
How to reset the trip odometer of the Renault Kangoo.
How to reset the trip odometer of the Renault Kangoo.
Renault Kangoo (2020-2026 / FFK, KFK, MK 3) The following video tutorial shows us how to reset the trip odometer of the 2024 Renault Kangoo. To perform this operation, we turn on the vehicle's …
How to Reset the Service in a Renault Kangoo?
How to Reset the Service in a Renault Kangoo?
Renault Kangoo (2020-2026 / FFK, KFK, MK 3) In this tutorial, you will see how to reset the service in a Renault Kangoo, an extremely simple and quick operation, to be performed only after comp…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos