Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Renault Kadjar remote control?

Model: Renault Kadjar MK 1 - Years 2015-2022
Part: Key

In this tutorial, we will see how to replace the battery of the Renault Kadjar remote control, a very simple and quick operation. To do this, we will need a small flathead screwdriver and a replacement battery of type CR2032. First, let's locate the slot along the bottom edge of the remote control, then insert the tip of the screwdriver into it, pry it open, and unlock the back cover. Next, we open the circular cap, remove the old battery, insert the replacement while being careful to respect the polarity, and reassemble everything by following the reverse procedure.

Posted on 30 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery on a Renault Kadjar
How to Replace the Key Battery on a Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) The steps to replace the battery in the Renault Kadjar key fob are simple and quick to perform independently. To replace the battery, remove the cove…
How to replace the battery in the Renault Kadjar remote control?
How to replace the battery in the Renault Kadjar remote control?
Renault Kadjar (2015-2022 / MK 1) In order to replace the battery of the Renault Kadjar remote control, you need to extract the emergency key from the top of the card. Once the key an…
How do you replace the battery of the Renault Kadjar remote control?
How do you replace the battery of the Renault Kadjar remote control?
Renault Kadjar (2015-2022 / MK 1) The battery inside the Renault Kadjar remote control can be replaced by levering with an object in order to completely detach the panel on the back o…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos