Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of a Renault remote control.

Model: Renault Renault Various
Part: Key

In this video, we will see how to change the battery of a Renault remote control: we will need a CR2032 button battery, which can easily be found at any supermarket or electronics store (and of course online). We will also need a small screwdriver. On the bottom, we will find a small notch that will allow us to open the cover, where we will find the battery compartment, from which we will pull off the small cover. We replace the battery, being careful with the polarity, replace the small cover, and then put the remote control cover back on.

Posted on 2 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the Renault remote control battery
How to replace the Renault remote control battery
Renault Renault Various Today we will explain how to replace the battery of the remote control for Renault vehicles Clio 4, Koleos, Scenic 3, Captur, and Megane 3. To replac…
Renault key battery replacement
Renault key battery replacement
Renault Renault Various Let's go to replace the battery of the keys of our Renault. First we press the button on the side of the keys and extract the emergency key from the …
How to replace the battery of the key fob remote for a Renault Kiger.
How to replace the battery of the key fob remote for a Renault Kiger.
Renault Renault Various The procedure for replacing the battery of the key remote of a Renault Kiger car is very simple. First, take the key remote and use a flat-tip screwd…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos