Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light in a Renault Modus

Model: Renault Modus MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

Video tutorial

The procedure to reset the service light in a Renault Modus car is simple and quick. The steps are described in the selected tutorial video: get in the car, insert the key, and turn it to the ON position to power the instrument panel without starting the engine.

Use the trip odometer button (TRIP) and scroll through the options on the display until you see the "service" option; at this point, hold the trip button for ten to fifteen seconds, you will see the km value flash and then reset. Release the button and turn off and on the ignition to check the result of the procedure.


Posted on 11 January 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on Renault Modus?
Renault Modus (2004-2013 / MK 1) The well-known spanner-shaped service light on vehicles illuminates when you are nearing the service interval, just like on the Renault Modus. But af…
How to Reset the Service Light on a Renault Modus
How to Reset the Service Light on a Renault Modus
Renault Modus (2004-2013 / MK 1) Learn how to reset the service light on a Renault Modus: turn on the instrument panel and use the arrows on the steering wheel controls (the lever on…
How to Reset the Service Light on the Renault Modus
How to Reset the Service Light on the Renault Modus
Renault Modus (2004-2013 / MK 1) If you have attempted to replace the engine oil and filter on this vehicle yourself, you can find the instructions below on how to reset the service …

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos