Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Renault Modus

Model: Renault Modus MK 1 - Years 2004-2013
Part: Service warning light

If you have attempted to replace the engine oil and filter on this vehicle yourself, you can find the instructions below on how to reset the service light on the instrument cluster, and you can also check the video. The first step is to access the driver's seat and turn on the ignition. Press the button located on the end of the right multifunction lever and scroll through the onboard computer menu until you reach the maintenance option. Then press and hold this button until the message starts to flash. Once the flashing stops, release the button, and the reset will be complete.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the 2006 Renault Modus
How to Reset the Service Light on the 2006 Renault Modus
Renault Modus (2004-2013 / MK 1) This guide shows how to reset the maintenance interval light on the 2006 Renault Modus. The first step is to turn on the instrument panel and press t…
How to Reset the Service Light on a Renault Modus
How to Reset the Service Light on a Renault Modus
Renault Modus (2004-2013 / MK 1) Learn how to reset the service light on a Renault Modus: turn on the instrument panel and use the arrows on the steering wheel controls (the lever on…
How to Reset the Service Light on a Renault Modus?
How to Reset the Service Light on a Renault Modus?
Renault Modus (2004-2013 / MK 1) In this tutorial, we will see how to reset the service light on a Renault Modus, a very simple and quick operation to be performed only after complet…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos