Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the cabin heating radiator of the Renault Koleos

Model: Renault Koleos MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Heater core

See other generations:
Video tutorial

The main steps outlined in this guide will allow us to disassemble and replace the cabin heater radiator of the Renault Koleos. First, let's open the front passenger door and begin to open the glove compartment by unscrewing the fastening screws to remove it; then we remove the plastic panel located at the bottom right, disconnecting the coolant pipes from the radiator, as shown in the video.

At this point, we unscrew the bracket screws to extract the heating matrix, replacing it with the new original one; finally, we top up with the new antifreeze.


Posted on 18 January 2026 by ScegliAuto


Related tutorials

How to Replace the Heating Radiator in a Renault Koleos
How to Replace the Heating Radiator in a Renault Koleos
Renault Koleos (2008-2015 / MK 1) In this video, you will see how to dismantle and replace the heating radiator in the cabin of a Renault Koleos, following the instructions below. Fir…
Replacement of the cabin air filter of the Renault Koleos.
Replacement of the cabin air filter of the Renault Koleos.
Renault Koleos (2016-2024 / MK 2) These short and simple steps will allow us to replace the cabin air filter of the Renault Koleos. First, we open the front door on the driver's side …
How to Replace the Cabin Filter on a Renault Koleos?
How to Replace the Cabin Filter on a Renault Koleos?
Renault Koleos (2008-2015 / MK 1) To replace the cabin filter on a Renault Koleos, loosen the screws securing the plastic panel of the dashboard located behind the footwell and on the…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos