Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the heating knob bulb of the Renault Master

Model: Renault Master MK 3 - Years 2010-2023
Part: Light bulb

Today we will explain how to replace the heating control knobs bulb in the Renault Master. The bulbs are located behind the central panel, so we start the replacement by removing part of the right side dashboard using a flathead screwdriver. We open the passenger glove compartment and detach the side clips to remove it. We insert the screwdriver between the plastic parts to unclip the dashboard. We disassemble the fans to access the panel. We disconnect the connectors of the central panel and access the knobs. We disconnect the bulb from its connector and replace it. We test its functionality and reassemble the panel.

Posted on 23 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the heating control unit on Renault Master III
Replacement of the heating control unit on Renault Master III
Renault Master (2010-2023 / MK 3) In this video we see how to replace the air conditioning control unit on a Renault Master III van: the youtuber had removed the control unit to chang…
How do you locate the heater fan fuse in a Renault Master 2011?
How do you locate the heater fan fuse in a Renault Master 2011?
Renault Master (2010-2023 / MK 3) Don't worry, it's not difficult to locate the heater fan fuse in a Renault Master. First of all, you need to find the fuse box, which is usually loca…
How to replace the rear headlight bulb of the Renault Master
How to replace the rear headlight bulb of the Renault Master
Renault Master (2010-2023 / MK 3) If you need to replace the rear headlight bulb of your Renault Master, but you don't know how to do it, then you just have to carefully read the foll…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos